VALPRO PRODUCT INSTRUCTION MANUALS
Removing the “Universal Spout” from a Classic line fuel can
For products with No. 170.200.00
The spout is compatible only with VALPRO manufactured 5L and 10L metal fuel cans.
VALPRO takes no responsibility for the compatibility of the spout with other manufacturer fuel cans.
To prevent vacuum formation in the fuel can and to ensure fast and convenient fuel dispensing, the spout is specially equipped with an air channel that allows air to enter the can during pouring.

Pull back the lever of the fuel spout to remove the product from the fuel can.
The fuel flow from the spout does not stop automatically. Monitor the fuel level during use and stop pouring in time. A small amount of fuel may leak from the air hole when stopping the pouring process.

Remove the fuel spout.

Important!
Before closing the fuel can lid, pull the lid with the hinge up by the lever.

Push the lever forward until the lid completely covers the neck opening.
If the lever does not move forward – see step No. 3.
The lever with the lid should move easily. Closing with too much force will damage the fuel can.

Close the lever by pressing the lever down as far as it will go.

Insert the locking pin through the lever and rotate it 90 degrees.

Caution!
Whenever tilted, make sure that the fuel can is airtight.

If the fuel can is equipped with a fuel spout holder, attach the spout to the holder for easier transportation.
VIDEO INSTRUCTION: