VALPRO PRODUCT INSTRUCTION MANUALS
Removing the “flexi spout” from a screw cap can
For products with No. 1169.00, 1169.00-02
The spout is compatible only with VALPRO manufactured 5L and 10L metal fuel cans.
VALPRO takes no responsibility for the compatibility of the spout with other manufacturer fuel cans.
To prevent vacuum formation in the fuel can and to ensure fast and convenient fuel dispensing, the spout is specially equipped with an air channel that allows air to enter the can during pouring.

Unscrew the spout from the fuel can by turning it counterclockwise.
The fuel flow from the spout does not stop automatically. Monitor the fuel level during use and stop pouring in time. A small amount of fuel may leak from the air hole when stopping the pouring process.
Keep in mind that after use, the inside of the spout and the gasket are covered with fuel.

Remove the spout.

Place the cap back on the neck of the fuel can. Close the fuel can shut by screwing the cap clockwise.

Screw the cap until you feel resistance. Then turn the cap an additional 1/6 of a turn. Do not tighten the cap too much, as it may be difficult to unscrew.

Caution!
Whenever tilted, make sure that the fuel can is airtight.

If the fuel can is equipped with a fuel spout holder, attach the spout to the holder for easier transportation.
VIDEO INSTRUCTION: