VALPRO PRODUCT INSTRUCTION MANUALS
Connecting the “Universal Spout” to a Classic line fuel can
For products with No. 170.200.00
The spout is compatible only with VALPRO manufactured 5L and 10L metal fuel cans.
VALPRO takes no responsibility for the compatibility of the spout with other manufacturer fuel cans.
To prevent vacuum formation in the fuel can and to ensure fast and convenient fuel dispensing, the spout is specially equipped with an air channel that allows air to enter the can during pouring.

Place the fuel can on a flat, stable surface.

Turn the locking pin and pull it out of the lever as far as it will go.

Lift the lever until the arms are fully released from the holder.

By pulling the lever, lift the lid up to open the neck opening.

Lock the lid in place by lowering the lid hinge down.

Place the fuel spout so it completely covers the neck opening of the fuel can.

Move the arms of the lever into the cavities of the holder and push the lever of the spout down as far as it will go.
The fuel flow from the spout does not stop automatically. Monitor the fuel level during use and stop pouring in time. A small amount of fuel may leak from the air hole when starting or stopping the pouring process.
VIDEO INSTRUCTION: